How to Care a Lipo Battery?

Lipo (lithium polymer) batteries are utilized in most consumer electronic devices. Over the past few years, they have been popular in the radio control industry. Today, they are the best choice for anyone searching for high power and long run times. However, these batteries, including the latest 3s Lipo battery, can be dangerous and unpredictable. Denting, dropping or crushing could shorten the lifespan of the battery. It can also cause a short – an invitation for fire. As such, users have to be careful when using them.

3s lipo batteryHow to care a Lipo battery properly

Unlike other types of batteries, Lipos warrant a particular routine of charging and discharging to ascertain longevity and proper performance. The number one tip is to never leave the battery unattended during charging and discharging process. However, there are many other things that you should take into account to take care of your battery.

 

Before charging the batteries

Always check the battery voltage before charging to make certain they are at or above the minimum safety starting voltage. In case you find the starting voltage below the recommended levels, it is likely that your batteries have been over-discharged or failed and should not charge.

Always check the 3s Lipo battery for any kind of damage. Check the battery wires, packaging and connectors for defects, which could cause a failure or short circuit. Fix the problem before charging.

 

 

Charging Lipo batteries

Only a charger for lipo batteries can be used to charge a lipo battery.  If a particular charger can support various battery types, please make sure you select the Lipo mode on the charger.

Always charge the batteries in an open area away from combustible liquids, materials, and surfaces. Never charge the battery below the freezing point. Also, do not charge batteries that are too hot to the touch.

Never overcharge the battery above their maximum voltage as rated by the manufacturer. Use a Lipo sack to ensure safe charging, and remove the battery when it is charged.

3s lipo battery

Discharging Lipo batteries

Do not discharge batteries at amperage rates above the specified level. Make sure that the temperature of the battery is below 140 degrees Fahrenheit during discharge.

Since batteries are likely to leak accidentally after an hour of discharge, you should keep them in a safe area away from combustible materials to avoid any reaction with chemicals.

 

Storing Lipo batteries

Never leave loose batteries when storing them. The terminals of batteries may contact one another and cause a short circuit. Do not store batteries in extreme temperatures.

Place them in a fireproof and non-conductive container. Never puncture, alter or impact batteries and related components.

 

Bottom line

Lipo batteries can be useful in consumer electronic devices for high power and uninterrupted running of the devices. However, great care has to be taken to ensure that they do not pose any problem. In case you lack information in this respect, you may want to get familiar with the caring guide (as discussed above) for 3s Lipo battery as well as other versions. With proper care and handling, you can use these batteries for a long time and also avert any unfortunate incidents of fire.

For more Lipo batteries, please click here.

Leave a Reply

Your email address will not be published. Required fields are marked *